Automatic high speed strapper with 5mm strapping belt
When use the machine, users must understand the function of each switch to ensure correct,safe operation of the machine, so as to avoid the cost of the machine can not work.
1. Touch screen
Users can choose according to the strapping requirements of the operation.
2. Start button
After the machine starts, press the start button, the machine starts to work properly.
3. Reset button
The machine in an emergency stop, suddenly cut off or after the failure of the boot, press the reset button for 3 seconds to complete the whole machine reset.
4. Transport selection button
(1) when the knob is in the automatic gear, the machine automatically carries on the box.
(2) when the knob is in the position of the transmission, the machine is only the delivery table work, the product of the input only forward.
5. Emergency stop button
Press the emergency stop switch, the power indicator light is still on, the rest of the action to stop. No matter what kind of machine, if the machine immediately stop running, just press this switch can, if need to restart, in accordance with the direction of the arrow on the switch to a point, then press the reset button, so that the machine reset and then start work.
Strapping line total power(incl. steering machine/ direction turn machine,gather align machine,strapping machine
Three phase five line
L2210 W2050 H1350
Gather align machine
L1800 W2050 H1350
L1500 W665 H1792
Relative humidity is less than 90%,temperature 0-40℃,noise is less than 75dB(A)
Belt index dial specification
Paper core inner diameter 200mm-210mm,outer diameter 400-450mm,width 175-190mm
Glue connect way
Bottom glue, glue area is more than 90%,glue location deviationis less than 2mm